BT136 triac
Triac for switching or dimming AC loads.
TypeTriac
Max voltage600 V
Max current4 A RMS
PackageTO-220
SemiconductorsReviewedMPN BT136-600EUsed in 1 project
In short
What is the BT136 triac and what is it used for?
Triac for switching or dimming AC loads. Makers use it for fan regulators, lamp dimmers.
Mains: isolate with a MOC3021 and fuse it
How it works
A bidirectional thyristor that turns on with a gate pulse and stays on until the current crosses zero.
Key specifications
| Diode or transistor spec | Value |
|---|---|
| Type | Triac |
| Max voltage | 600 V |
| Max current | 4 A RMS |
| Package | TO-220 |
Pinout
MT1Main terminal 1 (left)
MT2Main terminal 2, tab (middle)
GGate (right)
How to use it
Switches mains AC loads up to 4 A. The tab is live. Drive it through an opto-triac such as the MOC3021 for isolation. Mains circuits need training, insulation and a fuse.
Applications
Fan regulatorslamp dimmers
Builds that use it
Alternatives
- BT139 triac16 A version
- Solid state relay SSR-40DAReady-made isolated switch
Common questions
What is the BT136 triac used for?
In maker projects: fan regulators, lamp dimmers.
How does the BT136 triac work?
A bidirectional thyristor that turns on with a gate pulse and stays on until the current crosses zero.
What can I use instead of the BT136 triac?
BT139 triac and Solid state relay SSR-40DA.
