HC-06 Bluetooth module
Bluetooth Classic serial module that works as a slave only.
What is the HC-06 Bluetooth module and what is it used for?
Bluetooth Classic serial module that works as a slave only. Makers use it for phone-controlled robots.
A classic Bluetooth 2.0 serial port profile radio that turns Bluetooth data into UART bytes.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | Bluetooth 2.0 SPP |
| Band | 2.4 GHz |
| Typical range | About 10 m |
| Interface | UART, 9600 baud default |
| Supply voltage | 3.6 to 6 V module |
| Logic level | 3.3 V RX (use a divider from 5 V boards) |
Pinout
How to use it
Pair from a phone with PIN 1234 and use a Bluetooth serial terminal app. It is a slave only, so it cannot start a connection. Send AT commands at 9600 baud while it is not paired to change the name or baud rate.
Applications
Builds that use it
Alternatives
- HC-05 Bluetooth ModuleCan be master or slave
- JDY-31 Bluetooth moduleCheaper HC-06 compatible
- HM-10 BLE moduleBluetooth LE, works with iPhones
Common questions
What is the HC-06 Bluetooth module used for?
In maker projects: phone-controlled robots.
How does the HC-06 Bluetooth module work?
A classic Bluetooth 2.0 serial port profile radio that turns Bluetooth data into UART bytes.
What voltage does the HC-06 Bluetooth module need?
3.6 to 6 V module.
How do I connect the HC-06 Bluetooth module to an Arduino or ESP32?
UART, 9600 baud default. Pins: VCC (3.6 to 6 V), GND (Ground), TXD (To the board's RX), RXD (From the board's TX (3.3 V, use a 1 kΩ and 2 kΩ divider from 5 V)).
What can I use instead of the HC-06 Bluetooth module?
HC-05 Bluetooth Module, JDY-31 Bluetooth module and HM-10 BLE module.
