Idea
In short
How do you build a four-wheel drive base with strafing demo?
A four-motor chassis learns how different wheel directions create sideways motion, tested at low speed. You need Arduino Uno R3, Robot car chassis kit 4WD, L298N Dual H-Bridge Module × 2, Li-ion 18650 pack 3S 2P (11.1 V), Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Understand omnidirectional drive.
Parts list
- Development Boards
- Mechanical & Hardware
- Motor Drivers
- Batteries
- Passives
- Prototyping
How to build it
- Wire two drivers
- Drive each side
- Test forward and turn
- Try differential patterns
- Keep the robot on a stand during first tests
Common questions
What parts do I need for the four-wheel drive base with strafing demo?
Arduino Uno R3, Robot car chassis kit 4WD, L298N Dual H-Bridge Module × 2, Li-ion 18650 pack 3S 2P (11.1 V), Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
How long does the four-wheel drive base with strafing demo take to build?
About 330 minutes for a advanced maker.
