Idea
In short
How do you build a battery pack temperature watch?
A temperature sensor on a battery pack beeps if it warms past a limit during charging, as an extra reminder and never a replacement for a proper charger. You need Arduino Nano, LM35 IC (TO-92), Passive buzzer, 18650 cell 2600 mAh (branded), Battery holder 18650 single, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Watch temperature during charging.
Parts list
- Development Boards
- Integrated Circuits
- Motors & Actuators
- Batteries
- Power
- Power
- Prototyping
How to build it
- Fix the sensor to the cell holder
- Read the temperature
- Set a warning limit
- Beep above it
- Stop and check the charger
Common questions
What parts do I need for the battery pack temperature watch?
Arduino Nano, LM35 IC (TO-92), Passive buzzer, 18650 cell 2600 mAh (branded), Battery holder 18650 single, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
How long does the battery pack temperature watch take to build?
About 180 minutes for a intermediate maker.
