Idea
In short
How do you build a precision 2.5 V reference board?
A TL431 shunt reference makes a stable 2.5 V and 5 V reference to calibrate ADCs and meters. You need TL431 adjustable shunt reference, Resistor 1 kΩ × 2, Potentiometer 10 kΩ, Ceramic Capacitor 100 nF, Breadboard 830 Tie Points, 9 V battery and Digital multimeter.
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a reference and measure its stability.
Parts list
- Integrated Circuits
- PassivesResistor 1 kΩ × 2
- Passives
- Passives
- Prototyping
- Batteries
- Tools & Instruments
How to build it
- Set the cathode current
- Choose the divider for the output
- Measure line regulation
- Measure temperature drift with a warm air flow
- Compare with the Arduino 5 V
Common questions
What parts do I need for the precision 2.5 V reference board?
TL431 adjustable shunt reference, Resistor 1 kΩ × 2, Potentiometer 10 kΩ, Ceramic Capacitor 100 nF, Breadboard 830 Tie Points, 9 V battery and Digital multimeter.
How long does the precision 2.5 V reference board take to build?
About 90 minutes for a intermediate maker.
