Projects / Ideas / Adjustable voltage reference lab

Adjustable voltage reference lab

IntermediateAnalog CircuitsIdeaReviewed
In short

How do you build an adjustable voltage reference lab?

A shunt reference makes a stable voltage you set with two resistors, then compare it with a Zener. You need TL431 adjustable shunt reference, Resistor 1 kΩ, Resistor 10 kΩ, Potentiometer 10 kΩ, Zener diode 5.1 V (1N4733A), 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a precise reference.

How to build it

  1. Wire the reference with a bias resistor
  2. Set the output with the divider
  3. Measure against supply change
  4. Compare with a Zener
  5. Note the temperature effect

Related projects

Common questions

What parts do I need for the adjustable voltage reference lab?

TL431 adjustable shunt reference, Resistor 1 kΩ, Resistor 10 kΩ, Potentiometer 10 kΩ, Zener diode 5.1 V (1N4733A), 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

How long does the adjustable voltage reference lab take to build?

About 180 minutes for a intermediate maker.