Projects / Ideas / Look at a radio remote on a spectrum analyser

Look at a radio remote on a spectrum analyser

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a look at a radio remote on a spectrum analyser?

A small spectrum analyser shows the burst a key-fob remote makes when you press it, and the noise floor around it, as an introduction to radio measurement. You need Spectrum analyser (tinySA), 2.4 GHz antenna with u.FL to SMA pigtail and u.FL (IPEX) to SMA pigtail.

Level
Intermediate
Time
About 120 min
Parts
3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See radio signals on a spectrum analyser.

How to build it

  1. Set the span around the remote's band
  2. Find the noise floor
  3. Press the remote
  4. Catch the burst
  5. Note the signal level

Related projects

Common questions

What parts do I need for the look at a radio remote on a spectrum analyser?

Spectrum analyser (tinySA), 2.4 GHz antenna with u.FL to SMA pigtail and u.FL (IPEX) to SMA pigtail.

How long does the look at a radio remote on a spectrum analyser take to build?

About 120 minutes for a intermediate maker.