2.4 GHz antenna with u.FL to SMA pigtail
External antenna for ESP32-WROOM-U and NRF24 PA modules.
RadioPassive antenna
Band2.4 GHz
InterfaceSMA / u.FL (IPEX)
WirelessReviewedMPN 2.4G antenna + IPEX pigtailUsed in 1 project
In short
What is the 2.4 GHz antenna with u.FL to SMA pigtail and what is it used for?
External antenna for ESP32-WROOM-U and NRF24 PA modules. Makers use it for better Wi-Fi range.
How it works
A passive antenna tuned for 2.4 GHz Wi-Fi and Bluetooth with a thin coax pigtail.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | Passive antenna |
| Band | 2.4 GHz |
| Interface | SMA / u.FL (IPEX) |
Pinout
u.FL (IPEX)Small connector to the module
SMAAntenna end
How to use it
Press the u.FL straight down until it clicks, and pull it off straight up with a tool. They are rated for only about 30 connections. Check whether the antenna is SMA or RP-SMA, since the centre pin differs.
Applications
Better Wi-Fi range
Builds that use it
Alternatives
- 868 MHz LoRa antennaFor LoRa modules
Common questions
What is the 2.4 GHz antenna with u.FL to SMA pigtail used for?
In maker projects: better Wi-Fi range.
How does the 2.4 GHz antenna with u.FL to SMA pigtail work?
A passive antenna tuned for 2.4 GHz Wi-Fi and Bluetooth with a thin coax pigtail.
How do I connect the 2.4 GHz antenna with u.FL to SMA pigtail to an Arduino or ESP32?
SMA / u.FL (IPEX). Pins: u.FL (IPEX) (Small connector to the module), SMA (Antenna end).
What can I use instead of the 2.4 GHz antenna with u.FL to SMA pigtail?
868 MHz LoRa antenna.
