Idea
In short
How do you build a wheel types on a test track?
Fit a ball caster, an omni wheel and a rubber wheel to the same small chassis and compare turning, grip and drift on a track. You need Arduino Uno R3, Caster wheel (ball, metal), Omni wheel 58 mm, Robot wheel 65 mm for BO / TT motor, BO motor straight 100 RPM × 2, Motor driver shield L298P for Uno, 9 V battery and 9 V battery snap with DC jack.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare wheel types.
Parts list
- Development Boards
- Mechanical & Hardware
- Mechanical & Hardware
- Motors & Actuators
- Motors & Actuators
- Motor Drivers
- Batteries
- Power
How to build it
- Build the base
- Fit the first wheel set
- Drive a fixed course
- Measure the drift
- Repeat with each wheel type
Common questions
What parts do I need for the wheel types on a test track?
Arduino Uno R3, Caster wheel (ball, metal), Omni wheel 58 mm, Robot wheel 65 mm for BO / TT motor, BO motor straight 100 RPM × 2, Motor driver shield L298P for Uno, 9 V battery and 9 V battery snap with DC jack.
How long does the wheel types on a test track take to build?
About 240 minutes for a intermediate maker.
