Motor driver shield L298P for Uno
L298 H-bridge on an Uno shield with buzzer and headers.
FunctionDual H-bridge
Supply voltage6 to 12 V
RatingAbout 2 A per channel
Logic level5 V
Motor DriversReviewedMPN L298P shieldUsed in 3 projects
In short
What is the Motor driver shield L298P for Uno and what is it used for?
L298 H-bridge on an Uno shield with buzzer and headers. Makers use it for uno robot cars.
How it works
An L298P dual H-bridge on a shield with direction logic that needs only two pins per motor.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Dual H-bridge |
| Supply voltage | 6 to 12 V |
| Rating | About 2 A per channel |
| Logic level | 5 V |
Pinout
Motor A BScrew terminals
VINMotor supply
PinsMost boards use the Arduino Motor Shield layout (PWM A on 3, DIR A on 12, PWM B on 11, DIR B on 13), but check the silkscreen
How to use it
Set the direction pin and PWM the speed pin for each motor. Pins vary between makers, so read the board labels before coding. The L298P drops about 2 V, so use a supply a little above the motor voltage.
Applications
Uno robot cars
Builds that use it
Alternatives
- L298N Dual H-Bridge ModuleSame chip as a module
- Cytron MDD10A dual 10 A driverFar more current
Common questions
What is the Motor driver shield L298P for Uno used for?
In maker projects: uno robot cars.
How does the Motor driver shield L298P for Uno work?
An L298P dual H-bridge on a shield with direction logic that needs only two pins per motor.
What voltage does the Motor driver shield L298P for Uno need?
6 to 12 V.
What can I use instead of the Motor driver shield L298P for Uno?
L298N Dual H-Bridge Module and Cytron MDD10A dual 10 A driver.
