Idea
In short
How do you build an inrush current limiter demo?
A thermistor in series with a load is shown to limit the first current surge, measured with a monitor. You need Arduino Nano, Thermistor NTC 5D-11 (inrush limiter), INA219 Current Monitor, Electrolytic capacitor 1000 µF, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure inrush current with and without a limiter.
Parts list
- Development Boards
- Passives
- Sensors
- Passives
- Power
- Prototyping
How to build it
- Measure the surge into a capacitor
- Add the thermistor
- Measure again
- Let it warm and cool
- Discuss where limiters are used
Common questions
What parts do I need for the inrush current limiter demo?
Arduino Nano, Thermistor NTC 5D-11 (inrush limiter), INA219 Current Monitor, Electrolytic capacitor 1000 µF, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
How long does the inrush current limiter demo take to build?
About 180 minutes for a intermediate maker.
