Idea
In short
How do you build a buck converter efficiency sweep?
A small buck module is loaded in steps so you can plot efficiency against load current. You need Mini-360 buck converter, INA219 Current Monitor × 2, Arduino Nano, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure efficiency instead of assuming it.
Parts list
- Power
- Sensors
- Development Boards
- Passives
- Prototyping
How to build it
- Monitor input and output
- Step the load
- Compute efficiency
- Plot the curve
- Compare two modules
Common questions
What parts do I need for the buck converter efficiency sweep?
Mini-360 buck converter, INA219 Current Monitor × 2, Arduino Nano, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the buck converter efficiency sweep take to build?
About 240 minutes for a intermediate maker.
