Idea
In short
How do you build a split-flap style display with steppers?
Small stepper motors flip printed cards like an old station board to show letters and numbers. You need Arduino Nano, 28BYJ-48 Stepper Motor × 4, ULN2003 driver board × 4, Hall Effect Sensor A3144 × 4, Neodymium magnets (10 × 3 mm) × 4 and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 600 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Home steppers and move them to exact positions.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Sensors
- Mechanical & Hardware
- Power
How to build it
- 3D print a flap drum for each unit
- Home each drum with a hall sensor and magnet
- Step to the right letter
- Move all units together
- Send words over serial
Common questions
What parts do I need for the split-flap style display with steppers?
Arduino Nano, 28BYJ-48 Stepper Motor × 4, ULN2003 driver board × 4, Hall Effect Sensor A3144 × 4, Neodymium magnets (10 × 3 mm) × 4 and 5 V 2 A USB adapter.
How long does the split-flap style display with steppers take to build?
About 600 minutes for a advanced maker.
