Components / Motors and drivers / 28BYJ-48 Stepper Motor

28BYJ-48 Stepper Motor

Geared stepper motor commonly paired with a dedicated driver board.

TypeUnipolar geared stepper
Supply voltage5 V (12 V version also sold)
CurrentAbout 200 to 250 mA with the ULN2003 board
Torque or outputAbout 2048 steps per output turn in full-step (gear ratio about 64:1); slow, about 15 RPM max
Motors & ActuatorsReviewedMPN 28BYJ-48 5 V + ULN2003Used in 18 projects
In short

What is the 28BYJ-48 Stepper Motor and what is it used for?

Geared stepper motor commonly paired with a dedicated driver board. Makers use it for step a motor safely with a driver.

In the real world

Small positioning mechanisms

How it works

Actuators transform electrical input into motion. Drivers and separate power supplies are often essential.

Key specifications

Motor or actuator specValue
TypeUnipolar geared stepper
Supply voltage5 V (12 V version also sold)
CurrentAbout 200 to 250 mA with the ULN2003 board
Torque or outputAbout 2048 steps per output turn in full-step (gear ratio about 64:1); slow, about 15 RPM max
Control4 phase signals via ULN2003 driver
Watch out forGets warm when held still; switch coils off when idle

Pinout

IN1 to IN4ULN2003 inputs from 4 board pins
+ / −5 V supply to the driver board
5-wire plugMotor to driver (keyed)

How to use it

Drive it through the ULN2003 board it usually comes with. Use the Stepper or AccelStepper library with pins in the order IN1, IN3, IN2, IN4 for the Stepper library.

#include <Stepper.h>
Stepper m(2048, 8, 10, 9, 11);
void setup() { m.setSpeed(10); }
void loop() { m.step(2048); delay(500); m.step(-2048); delay(500); }

Applications

Alternatives

Buy at

Common questions

What is the 28BYJ-48 Stepper Motor used for?

In products: small positioning mechanisms. In maker projects: step a motor safely with a driver.

How does the 28BYJ-48 Stepper Motor work?

Actuators transform electrical input into motion. Drivers and separate power supplies are often essential.

What voltage does the 28BYJ-48 Stepper Motor need?

5 V (12 V version also sold).

What can I use instead of the 28BYJ-48 Stepper Motor?

SG90 Micro Servo.