Idea
In short
How do you build a persistence of vision display?
A spinning stick of LEDs draws text in the air, timed by a hall sensor that marks each turn. You need Arduino Nano, LED 5 mm red × 8, Resistor 220 Ω × 8, Hall Effect Sensor A3144, Neodymium magnets (10 × 3 mm), DC motor 130 size (toy motor), 9 V battery and 9 V battery snap with DC jack.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Sync fast LED updates to rotation.
Parts list
- Development Boards
- SemiconductorsLED 5 mm red × 8
- PassivesResistor 220 Ω × 8
- Sensors
- Mechanical & Hardware
- Motors & Actuators
- Batteries
- Power
How to build it
- Mount LEDs on a balanced arm
- Detect each turn with the hall sensor
- Measure the time per turn
- Show one column per slice
- Balance the arm before you spin it fast
Common questions
What parts do I need for the persistence of vision display?
Arduino Nano, LED 5 mm red × 8, Resistor 220 Ω × 8, Hall Effect Sensor A3144, Neodymium magnets (10 × 3 mm), DC motor 130 size (toy motor), 9 V battery and 9 V battery snap with DC jack.
How long does the persistence of vision display take to build?
About 300 minutes for a advanced maker.
