Idea
In short
How do you build a dosing pump for plant nutrients?
A peristaltic pump adds a measured amount of liquid, such as plant food, on a schedule. You need Arduino Nano, Peristaltic pump 12 V, MOSFET IRLZ44N, Rectifier Diode 1N4007, DS3231 RTC module, 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Dose small liquid amounts accurately.
Parts list
- Development Boards
- Motors & Actuators
- Semiconductors
- Semiconductors
- Sensors
- Power
- Passives
- Prototyping
How to build it
- Calibrate millilitres per second
- Switch the pump with a MOSFET
- Dose by time
- Schedule with the clock
- Log each dose
Common questions
What parts do I need for the dosing pump for plant nutrients?
Arduino Nano, Peristaltic pump 12 V, MOSFET IRLZ44N, Rectifier Diode 1N4007, DS3231 RTC module, 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
How long does the dosing pump for plant nutrients take to build?
About 330 minutes for a advanced maker.
