Idea
In short
How do you build a bike helmet crash alert?
A helmet IMU detects a crash and, unless cancelled in 30 seconds, sends your GPS location by SMS. You need ESP32 DevKit V1, MPU6050 IMU, GPS module NEO-6M, SIM800L GSM module, Active buzzer 5 V, Tactile push button 6 mm and Li-Po battery 3.7 V 2000 mAh.
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect impacts and send an alert with location.
Parts list
- Development Boards
- Sensors
- Sensors
- Wireless
- Motors & Actuators
- Switches
- Batteries
How to build it
- Detect a sharp spike then stillness
- Beep and wait 30 s for a cancel press
- Get a GPS fix
- Send an SMS with a map link
- Test by dropping the unit on a cushion
Common questions
What parts do I need for the bike helmet crash alert?
ESP32 DevKit V1, MPU6050 IMU, GPS module NEO-6M, SIM800L GSM module, Active buzzer 5 V, Tactile push button 6 mm and Li-Po battery 3.7 V 2000 mAh.
How long does the bike helmet crash alert take to build?
About 300 minutes for a intermediate maker.
