Projects / Ideas / Plug-in sensor shield tour

Plug-in sensor shield tour

BeginnerLearningIdeaReviewed
In short

How do you build a plug-in sensor shield tour?

A sensor shield with plug-in headers lets you try four sensors with no breadboard and compare the wiring with a bare breadboard build. You need Arduino Uno R3, Sensor shield V5 for Uno, Grove cable 4-pin, LDR Photoresistor, Resistor 10 kΩ, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Beginner
Time
About 90 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use a sensor shield.

How to build it

  1. Fit the shield
  2. Plug in a button
  3. Plug in a light sensor
  4. Read both
  5. Compare the wiring effort with a breadboard

Related projects

Common questions

What parts do I need for the plug-in sensor shield tour?

Arduino Uno R3, Sensor shield V5 for Uno, Grove cable 4-pin, LDR Photoresistor, Resistor 10 kΩ, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the plug-in sensor shield tour take to build?

About 90 minutes for a beginner maker.