Components / Interface and audio modules / Sensor shield V5 for Uno

Sensor shield V5 for Uno

Gives every Uno pin its own signal, 5 V and GND header.

FunctionPin breakout shield
Supply voltageThrough the Uno or external servo terminal
InterfaceAll Uno pins
Logic level5 V
InterfacesReviewedMPN Sensor Shield V5Used in 2 projects
SENSOR
In short

What is the Sensor shield V5 for Uno and what is it used for?

Gives every Uno pin its own signal, 5 V and GND header. Makers use it for servos and sensors without a breadboard.

How it works

A passive breakout that brings every pin out with its own power and ground.

Key specifications

Interface module specValue
FunctionPin breakout shield
Supply voltageThrough the Uno or external servo terminal
InterfaceAll Uno pins
Logic level5 V

Pinout

G V S rowsGround, 5 V and signal for each pin
SERVO PWRExternal servo supply terminal
SEL jumperFeed V from the Uno or the terminal
I2C UART headersBus breakouts

How to use it

Plug sensors and servos straight in with 3-pin leads. Power several servos from the terminal and remove the SEL jumper so they do not draw through the Uno.

Applications

Alternatives

Buy at

Common questions

What is the Sensor shield V5 for Uno used for?

In maker projects: servos and sensors without a breadboard.

How does the Sensor shield V5 for Uno work?

A passive breakout that brings every pin out with its own power and ground.

What voltage does the Sensor shield V5 for Uno need?

Through the Uno or external servo terminal.

How do I connect the Sensor shield V5 for Uno to an Arduino or ESP32?

All Uno pins. Pins: G V S rows (Ground, 5 V and signal for each pin), SERVO PWR (External servo supply terminal), SEL jumper (Feed V from the Uno or the terminal), I2C UART headers (Bus breakouts).

What can I use instead of the Sensor shield V5 for Uno?

Prototype shield for Uno with mini breadboard.