Idea
In short
How do you build a sixteen-bit bench voltmeter?
A precision ADC reads small voltages more finely than the built-in ADC. You need Arduino Nano, ADS1115 16-bit ADC module, SSD1306 OLED Display, Resistor 100 kΩ, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a more precise voltmeter for slow signals.
Parts list
- Development Boards
- Sensors
- Displays
- Passives
- Passives
- Prototyping
How to build it
- Read single-ended and differential inputs
- Set the gain range
- Add a divider for higher voltages
- Average readings
- Compare with a multimeter
Common questions
What parts do I need for the sixteen-bit bench voltmeter?
Arduino Nano, ADS1115 16-bit ADC module, SSD1306 OLED Display, Resistor 100 kΩ, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the sixteen-bit bench voltmeter take to build?
About 210 minutes for a intermediate maker.
