Idea
In short
How do you build a motor current meter?
An ACS712 shows the current of a small DC motor so you can see stall current and starting peaks. You need Arduino Nano, ACS712 current sensor module (5 A / 20 A / 30 A), DC motor 130 size (toy motor), MOSFET IRLZ44N, SSD1306 OLED Display and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a Hall-effect current sensor with noise.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Displays
- Power
How to build it
- Wire the sensor in series with the motor
- Remove the zero-current offset
- Sample fast to see the start peak
- Show the peak and average
- Stall the motor briefly and note the current
Common questions
What parts do I need for the motor current meter?
Arduino Nano, ACS712 current sensor module (5 A / 20 A / 30 A), DC motor 130 size (toy motor), MOSFET IRLZ44N, SSD1306 OLED Display and 12 V 2 A DC adapter.
How long does the motor current meter take to build?
About 90 minutes for a intermediate maker.
