Projects / Ideas / Machine guard interlock

Machine guard interlock

IntermediateSafetyIdeaReviewed
In short

How do you build a machine guard interlock?

A magnetic switch on a guard door stops a machine model when opened, with a reset button. You need Arduino Nano, Door reed switch MC-38 × 2, Relay Module 5V, Emergency stop button (mushroom), Active buzzer 5 V, LED 5 mm red and LED 5 mm green.

Level
Intermediate
Time
About 90 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a safety interlock.

Parts list

How to build it

  1. Use two switches for redundancy
  2. Cut power when either opens
  3. Require a manual restart
  4. Add a status light
  5. Check the circuit fails safe

Related projects

Common questions

What parts do I need for the machine guard interlock?

Arduino Nano, Door reed switch MC-38 × 2, Relay Module 5V, Emergency stop button (mushroom), Active buzzer 5 V, LED 5 mm red and LED 5 mm green.

How long does the machine guard interlock take to build?

About 90 minutes for a intermediate maker.