Projects / Ideas / Rock paper scissors robot hand

Rock paper scissors robot hand

IntermediateGames & ToysIdeaReviewed
In short

How do you build a rock paper scissors robot hand?

Three servos form a simple hand that randomly shows rock, paper or scissors against your own choice shown on three buttons. You need Arduino Uno R3, SG90 Micro Servo × 3, Tactile push button 6 mm × 3, Resistor 10 kΩ × 3, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 240 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control several servos for a game.

Parts list

How to build it

  1. Make a three-finger paper hand
  2. Calibrate each servo for open and closed
  3. Read the player's button
  4. Pick a random robot move
  5. Show the winner with two LEDs

Related projects

Common questions

What parts do I need for the rock paper scissors robot hand?

Arduino Uno R3, SG90 Micro Servo × 3, Tactile push button 6 mm × 3, Resistor 10 kΩ × 3, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the rock paper scissors robot hand take to build?

About 240 minutes for a intermediate maker.