Idea
In short
How do you build a tilt-controlled marble maze?
Tilt a small board and two servos tilt a maze platform in the same direction so a marble can be steered. You need Arduino Uno R3, MPU6050 IMU, SG90 Micro Servo × 2, Breadboard 830 Tie Points, Jumper wires male to male (40 pcs, 20 cm) and Jumper wires male to female (40 pcs).
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Mirror an IMU angle to two servos.
Parts list
- Development Boards
- Sensors
- Motors & ActuatorsSG90 Micro Servo × 2
- Prototyping
- Prototyping
- Prototyping
How to build it
- Read the IMU tilt angles
- Map each axis to a servo angle
- Smooth the motion with a filter
- Build a light platform on the servos
- Add dead-band to stop jitter
Related projects
Common questions
What parts do I need for the tilt-controlled marble maze?
Arduino Uno R3, MPU6050 IMU, SG90 Micro Servo × 2, Breadboard 830 Tie Points, Jumper wires male to male (40 pcs, 20 cm) and Jumper wires male to female (40 pcs).
How long does the tilt-controlled marble maze take to build?
About 210 minutes for a intermediate maker.
