Idea
In short
How do you build a camera line follower?
A Pi camera finds a line and follows curves faster than IR sensors can. You need Raspberry Pi Zero 2 W, Raspberry Pi Camera Module 3, TB6612FNG Motor Driver, BO motor straight 100 RPM × 2, Robot car chassis kit 2WD (acrylic), Li-ion 18650 pack 3S 2P (11.1 V) and LM2596 Buck Module.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use computer vision for line following.
Parts list
- Single Board Computers
- SBC Accessories
- Motor Drivers
- Motors & Actuators
- Mechanical & Hardware
- Batteries
- Power
How to build it
- Mount the camera angled down
- Threshold the line
- Find its centre
- Steer with PID
- Slow for sharp bends
Common questions
What parts do I need for the camera line follower?
Raspberry Pi Zero 2 W, Raspberry Pi Camera Module 3, TB6612FNG Motor Driver, BO motor straight 100 RPM × 2, Robot car chassis kit 2WD (acrylic), Li-ion 18650 pack 3S 2P (11.1 V) and LM2596 Buck Module.
How long does the camera line follower take to build?
About 300 minutes for a advanced maker.
