Components / Raspberry Pi and Jetson / Raspberry Pi Camera Module 3

Raspberry Pi Camera Module 3

12 MP autofocus camera with HDR for all Raspberry Pi boards with a camera port.

FunctionCamera, Sony IMX708 12 MP with autofocus
InterfaceMIPI CSI-2 ribbon (Pi 5 needs the 22-pin to 15-pin cable)
Rating1080p50 video
SBC AccessoriesReviewedMPN SC0872Used in 36 projects
RASPBERR
In short

What is the Raspberry Pi Camera Module 3 and what is it used for?

12 MP autofocus camera with HDR for all Raspberry Pi boards with a camera port. Makers use it for security cameras, vision AI.

How it works

A 12 MP Sony IMX708 sensor with phase-detect autofocus and HDR, streaming raw frames over CSI-2.

Key specifications

Interface module specValue
FunctionCamera, Sony IMX708 12 MP with autofocus
InterfaceMIPI CSI-2 ribbon (Pi 5 needs the 22-pin to 15-pin cable)
Rating1080p50 video

Pinout

15-pin CSI ribbonMIPI CSI-2 camera link

How to use it

On a Pi 4 the ribbon's contacts face the HDMI ports. A Pi 5 needs the 22-pin to 15-pin cable. Test with rpicam-hello and program it with Picamera2 in Python. Wide and NoIR versions exist.

Applications

Alternatives

Buy at

Common questions

What is the Raspberry Pi Camera Module 3 used for?

In maker projects: security cameras, vision AI.

How does the Raspberry Pi Camera Module 3 work?

A 12 MP Sony IMX708 sensor with phase-detect autofocus and HDR, streaming raw frames over CSI-2.

How do I connect the Raspberry Pi Camera Module 3 to an Arduino or ESP32?

MIPI CSI-2 ribbon (Pi 5 needs the 22-pin to 15-pin cable). Pins: 15-pin CSI ribbon (MIPI CSI-2 camera link).

What can I use instead of the Raspberry Pi Camera Module 3?

Raspberry Pi Camera Module 2, Raspberry Pi High Quality Camera and Raspberry Pi 5 to Camera cable (22 to 15 pin).