Idea
In short
How do you build a person-following robot?
A Jetson tracks a person with a camera and a rover follows at a safe distance. You need NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin, Robot car chassis kit 4WD, TB6612FNG Motor Driver × 2, Li-ion 18650 pack 3S 2P (11.1 V), LM2596 Buck Module and NVIDIA Jetson Orin Nano 19 V power adapter.
- Level
- Advanced
- Time
- About 600 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine detection with motor control.
Parts list
- Single Board Computers
- SBC Accessories
- Mechanical & Hardware
- Motor Drivers
- Batteries
- Power
- SBC Accessories
How to build it
- Detect a person
- Choose the closest
- Steer to keep them centred
- Hold a set distance from box size
- Stop if lost
Common questions
What parts do I need for the person-following robot?
NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin, Robot car chassis kit 4WD, TB6612FNG Motor Driver × 2, Li-ion 18650 pack 3S 2P (11.1 V), LM2596 Buck Module and NVIDIA Jetson Orin Nano 19 V power adapter.
How long does the person-following robot take to build?
About 600 minutes for a advanced maker.
