Idea
In short
How do you build a patrolling gas leak detector?
A line-following robot patrols a factory floor with a gas sensor and reports leaks with location. You need ESP32 DevKit V1, MQ-6 LPG sensor module, TCRT5000 IR reflective sensor module × 3, TB6612FNG Motor Driver, BO motor straight 100 RPM × 2, Robot car chassis kit 2WD (acrylic), RC522 RFID reader and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine a mobile base and a safety sensor.
Parts list
- Development Boards
- Sensors
- Sensors
- Motor Drivers
- Motors & Actuators
- Mechanical & Hardware
- Wireless
- Power
How to build it
- Follow the line
- Read gas level at each tag
- Stop and alarm above limit
- Send location to a phone
- Return to charging
Common questions
What parts do I need for the patrolling gas leak detector?
ESP32 DevKit V1, MQ-6 LPG sensor module, TCRT5000 IR reflective sensor module × 3, TB6612FNG Motor Driver, BO motor straight 100 RPM × 2, Robot car chassis kit 2WD (acrylic), RC522 RFID reader and 5 V 2 A USB adapter.
How long does the patrolling gas leak detector take to build?
About 480 minutes for a advanced maker.
