How do you build a railway track crack detector model?
A small cart with IR sensors runs along a model track and stops and sends its distance travelled by Bluetooth when it finds a gap. You need Arduino Uno R3, TCRT5000 IR reflective sensor module × 2, Optical encoder speed sensor (slot, LM393), L298N Dual H-Bridge Module, BO motor straight 100 RPM × 2, HC-05 Bluetooth Module, Robot car chassis kit 2WD (acrylic), Battery holder 18650 2S (series) and 18650 cell 2600 mAh (branded) × 2.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 9
Detect a missing surface with reflective sensors and measure distance with wheel pulses.
Parts list
- Development Boards
- Sensors
- Sensors
- Motor Drivers
- Motors & Actuators
- Wireless
- Mechanical & Hardware
- Power
- Batteries
How to build it
- Mount two reflective sensors looking down at the rails
- Count wheel pulses to measure distance
- Stop the motors when a sensor sees no rail
- Send the distance by Bluetooth
- Test on a cardboard track with a cut
Common questions
What parts do I need for the railway track crack detector model?
Arduino Uno R3, TCRT5000 IR reflective sensor module × 2, Optical encoder speed sensor (slot, LM393), L298N Dual H-Bridge Module, BO motor straight 100 RPM × 2, HC-05 Bluetooth Module, Robot car chassis kit 2WD (acrylic), Battery holder 18650 2S (series) and 18650 cell 2600 mAh (branded) × 2.
How long does the railway track crack detector model take to build?
About 180 minutes for a intermediate maker.
