Idea
In short
How do you build a warehouse robot?
A line-following carrier picks a shelf by RFID and brings it to a pick station. You need ESP32 DevKit V1, TCRT5000 IR reflective sensor module × 5, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 5, TB6612FNG Motor Driver, BO motor straight 100 RPM × 2 and Robot car chassis kit 2WD (acrylic).
- Level
- Advanced
- Time
- About 600 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Prototype warehouse automation.
Parts list
- Development Boards
- Sensors
- Wireless
- Wireless
- Motor Drivers
- Motors & Actuators
- Mechanical & Hardware
How to build it
- Follow lines
- Read tags
- Choose route
- Stop at a station
- Report status
Common questions
What parts do I need for the warehouse robot?
ESP32 DevKit V1, TCRT5000 IR reflective sensor module × 5, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 5, TB6612FNG Motor Driver, BO motor straight 100 RPM × 2 and Robot car chassis kit 2WD (acrylic).
How long does the warehouse robot take to build?
About 600 minutes for a advanced maker.
