Idea
In short
How do you build an indoor delivery cart?
A cart carries a drink between rooms on a taped line, stopping at RFID markers. You need Arduino Nano, TCRT5000 IR reflective sensor module × 3, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 3, TB6612FNG Motor Driver, BO motor straight 100 RPM × 2, Robot car chassis kit 2WD (acrylic), Battery holder 4 × AA with switch and AA alkaline battery × 4.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Follow a line to stations.
Parts list
- Development Boards
- Sensors
- Wireless
- Wireless
- Motor Drivers
- Motors & Actuators
- Mechanical & Hardware
- Power
- Batteries
How to build it
- Follow a coloured tape line
- Read the station tag
- Stop and beep
- Wait for a button
- Return home
Common questions
What parts do I need for the indoor delivery cart?
Arduino Nano, TCRT5000 IR reflective sensor module × 3, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 3, TB6612FNG Motor Driver, BO motor straight 100 RPM × 2, Robot car chassis kit 2WD (acrylic), Battery holder 4 × AA with switch and AA alkaline battery × 4.
How long does the indoor delivery cart take to build?
About 240 minutes for a intermediate maker.
