Idea
In short
How do you build a pipe inspection crawler?
A small crawler with an LED and camera inspects a pipe or duct and sends video to a phone. You need ESP32-CAM, TB6612FNG Motor Driver, N20 micro metal gear motor × 2, High-power LED 1 W white (star) × 2, Li-Po battery 3.7 V 1000 mAh and TP4056 module with protection (USB-C).
- Level
- Advanced
- Time
- About 360 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a compact camera robot.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Optoelectronics
- Batteries
- Power
How to build it
- Build a narrow chassis
- Mount the camera and lights
- Drive over Wi-Fi
- Stream video
- Add a safety tether
Common questions
What parts do I need for the pipe inspection crawler?
ESP32-CAM, TB6612FNG Motor Driver, N20 micro metal gear motor × 2, High-power LED 1 W white (star) × 2, Li-Po battery 3.7 V 1000 mAh and TP4056 module with protection (USB-C).
How long does the pipe inspection crawler take to build?
About 360 minutes for a advanced maker.
