Idea
In short
How do you build an RC car telemetry over LoRa?
An RC car sends speed, battery and temperature to a handheld screen over LoRa. You need Heltec WiFi LoRa 32 V3 × 2, Voltage sensor module (0 to 25 V), DS18B20 Temperature Sensor, Hall Effect Sensor A3144 and Neodymium magnets (10 × 3 mm).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Send small telemetry packets reliably.
Parts list
- Development Boards
- Sensors
- Sensors
- Sensors
- Mechanical & Hardware
How to build it
- Measure battery voltage, motor temperature and wheel speed
- Pack them into a small packet
- Send every 500 ms
- Show on the receiver's OLED
- Warn on low battery
Common questions
What parts do I need for the RC car telemetry over LoRa?
Heltec WiFi LoRa 32 V3 × 2, Voltage sensor module (0 to 25 V), DS18B20 Temperature Sensor, Hall Effect Sensor A3144 and Neodymium magnets (10 × 3 mm).
How long does the RC car telemetry over LoRa take to build?
About 240 minutes for a intermediate maker.
