Idea
In short
How do you build a bike wheel speedometer?
A magnet on a spoke and a Hall sensor on the fork measure speed and distance on a small display. You need Arduino Nano, Hall Effect Sensor A3144, Neodymium magnets (10 × 3 mm), Resistor 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure speed from pulses.
Parts list
- Development Boards
- Sensors
- Mechanical & Hardware
- Passives
- Displays
- Prototyping
How to build it
- Mount the magnet and sensor
- Count pulses with an interrupt
- Convert using the wheel size
- Show speed and distance
- Save the trip distance
Common questions
What parts do I need for the bike wheel speedometer?
Arduino Nano, Hall Effect Sensor A3144, Neodymium magnets (10 × 3 mm), Resistor 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the bike wheel speedometer take to build?
About 240 minutes for a intermediate maker.
