Idea
In short
How do you build a wireless charging distance test?
Measure the output of a small wireless charging module through spacers of different thickness and see how fast it falls. You need Wireless charging module (5 V 1 A Qi-style), 5 V 2 A USB adapter, Resistor 220 Ω × 2, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure wireless power versus distance.
Parts list
- Power
- Power
- PassivesResistor 220 Ω × 2
- Tools & Instruments
- Prototyping
How to build it
- Power the transmitter
- Place the receiver on spacers
- Load it with a resistor
- Measure the voltage and current
- Plot power against gap
Common questions
What parts do I need for the wireless charging distance test?
Wireless charging module (5 V 1 A Qi-style), 5 V 2 A USB adapter, Resistor 220 Ω × 2, Digital multimeter and Breadboard 830 Tie Points.
How long does the wireless charging distance test take to build?
About 150 minutes for a intermediate maker.
