Idea
In short
How do you build a power transistor dummy load?
A power transistor on a heatsink acts as an adjustable load to test a small supply, with limits on current and temperature. Keep it low voltage and watch the heat. You need 2N3055 NPN power transistor, Heatsink TO-220, Potentiometer 10 kΩ, Resistor 1 kΩ, Digital multimeter × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Load a small supply in a controlled way.
Parts list
- Semiconductors
- Tools & Instruments
- Passives
- Passives
- Tools & Instruments
- Prototyping
How to build it
- Work out the power the transistor can lose
- Mount it on the heatsink
- Add the base drive
- Step the current up slowly
- Stop when the case gets hot
Common questions
What parts do I need for the power transistor dummy load?
2N3055 NPN power transistor, Heatsink TO-220, Potentiometer 10 kΩ, Resistor 1 kΩ, Digital multimeter × 2 and Breadboard 830 Tie Points.
How long does the power transistor dummy load take to build?
About 150 minutes for a intermediate maker.
