Projects / Ideas / Precision PT100 thermometer

Precision PT100 thermometer

AdvancedTest & MeasurementIdeaReviewed
In short

How do you build a precision PT100 thermometer?

An RTD amplifier gives accurate temperature readings for ice-bath and kettle calibration checks. You need Arduino Nano, MAX31865 RTD amplifier (PT100), SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Advanced
Time
About 240 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a thermometer you can check against reference points.

How to build it

  1. Wire the RTD amplifier
  2. Read the resistance and convert
  3. Check at ice water and boiling water
  4. Record the offset
  5. Apply a correction

Related projects

Common questions

What parts do I need for the precision PT100 thermometer?

Arduino Nano, MAX31865 RTD amplifier (PT100), SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the precision PT100 thermometer take to build?

About 240 minutes for a advanced maker.