Components / Sensors / MAX31865 RTD amplifier (PT100)

MAX31865 RTD amplifier (PT100)

Reads PT100 or PT1000 platinum RTD probes accurately.

MeasuresTemperature with an RTD
InterfaceSPI
Supply voltage3 to 3.6 V
SensorsReviewedMPN MAX31865Used in 3 projects
MAX31865
In short

What is the MAX31865 RTD amplifier (PT100) and what is it used for?

Reads PT100 or PT1000 platinum RTD probes accurately. Makers use it for lab and industrial temperature.

How it works

It measures the RTD's resistance against a precise reference resistor; platinum's resistance rises predictably with temperature.

Key specifications

Sensor specValue
MeasuresTemperature with an RTD
InterfaceSPI
Supply voltage3 to 3.6 V

Pinout

VIN3.3 to 5 V on modules
GNDGround
CLKSPI clock
SDOData out
SDIData in
CSChip select
RDYData ready
F+, RTD+, RTD−, F−RTD terminals

How to use it

Set the solder jumpers on the board for a 2, 3 or 4-wire RTD, and tell the library the reference resistor (430 Ω for PT100). Four-wire RTDs give the best accuracy.

Applications

Alternatives

Buy at

Common questions

What is the MAX31865 RTD amplifier (PT100) used for?

In maker projects: lab and industrial temperature.

How does the MAX31865 RTD amplifier (PT100) work?

It measures the RTD's resistance against a precise reference resistor; platinum's resistance rises predictably with temperature.

What voltage does the MAX31865 RTD amplifier (PT100) need?

3 to 3.6 V.

How do I connect the MAX31865 RTD amplifier (PT100) to an Arduino or ESP32?

SPI. Pins: VIN (3.3 to 5 V on modules), GND (Ground), CLK (SPI clock), SDO (Data out), SDI (Data in), CS (Chip select).

What can I use instead of the MAX31865 RTD amplifier (PT100)?

DS18B20 waterproof probe.