Idea
In short
How do you build a low-power weather node?
A stripped-down board sleeps between readings and wakes every minute to read a sensor, aiming for months on a small battery. Use small cells only and no charging. You need Arduino Pro Mini 5 V 16 MHz, USB to TTL adapter (CH340G), BME280 Environmental Sensor, 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a node sleep.
Parts list
- Development Boards
- Interfaces
- Sensors
- Batteries
- Power
- Tools & Instruments
- Prototyping
How to build it
- Upload with the serial adapter
- Read the sensor
- Add sleep between readings
- Measure sleep current
- Estimate battery life
Common questions
What parts do I need for the low-power weather node?
Arduino Pro Mini 5 V 16 MHz, USB to TTL adapter (CH340G), BME280 Environmental Sensor, 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.
How long does the low-power weather node take to build?
About 210 minutes for a intermediate maker.
