Arduino Pro Mini 5 V 16 MHz
Tiny ATmega328P board without USB. Program it through a USB-serial adapter.
MicrocontrollerATmega328P
Clock16 MHz (8 MHz on the 3.3 V version)
Flash32 KB
RAM2 KB
Development BoardsReviewedMPN Pro Mini 328 5VUsed in 2 projects
In short
What is the Arduino Pro Mini 5 V 16 MHz and what is it used for?
Tiny ATmega328P board without USB. Program it through a USB-serial adapter. Makers use it for small finished builds, battery projects.
How it works
A bare ATmega328P with a regulator and crystal, the same chip as the Uno in a tiny board.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ATmega328P |
| Clock | 16 MHz (8 MHz on the 3.3 V version) |
| Flash | 32 KB |
| RAM | 2 KB |
| Logic level | 5 V |
| Input voltage | 5 to 12 V on RAW |
| I/O pins | 14 digital, 8 analog |
| ADC | 10-bit |
| Current per I/O pin | 20 mA recommended |
Pinout
RAW5 to 12 V in
VCCRegulated 5 V
TXO RXISerial
DTR (GRN)Auto-reset from the programmer
A4 A5I2C SDA SCL
A6 A7Analog input only
13LED
How to use it
There is no USB, so program it with a 5 V USB-to-serial adapter wired GND, VCC, TX to RXI, RX to TXO and DTR to GRN. Remove the power LED for battery projects to bring sleep current down to microamps.
Applications
Small finished buildsbattery projects
Builds that use it
Alternatives
- Arduino Nano (CH340, Type-C)Same chip with USB built in
- Arduino Pro Mini 3.3 V 8 MHz3.3 V version for 3.3 V sensors
Common questions
What is the Arduino Pro Mini 5 V 16 MHz used for?
In maker projects: small finished builds, battery projects.
How does the Arduino Pro Mini 5 V 16 MHz work?
A bare ATmega328P with a regulator and crystal, the same chip as the Uno in a tiny board.
What can I use instead of the Arduino Pro Mini 5 V 16 MHz?
Arduino Nano (CH340, Type-C) and Arduino Pro Mini 3.3 V 8 MHz.
