Idea
In short
How do you build a resettable fuse demo?
A resettable fuse protects a small load. You short it on purpose with a low-power supply and watch it trip, cool and recover. You need Polyfuse (PTC resettable) 500 mA, LED 5 mm red, Resistor 220 Ω, Tactile push button 6 mm, 5 V 2 A USB adapter, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See how a PTC fuse protects a circuit.
Parts list
- Passives
- Semiconductors
- Passives
- Switches
- Power
- Tools & Instruments
- Prototyping
How to build it
- Measure the fuse at rest
- Power an LED through it
- Add a safe overload with a button
- Time the trip
- Let it reset and measure again
Common questions
What parts do I need for the resettable fuse demo?
Polyfuse (PTC resettable) 500 mA, LED 5 mm red, Resistor 220 Ω, Tactile push button 6 mm, 5 V 2 A USB adapter, Digital multimeter and Breadboard 830 Tie Points.
How long does the resettable fuse demo take to build?
About 150 minutes for a beginner maker.
