Projects / Ideas / Eight-servo wave table

Eight-servo wave table

IntermediateRoboticsIdeaReviewed
In short

How do you build an eight-servo wave table?

A sixteen-channel driver moves eight servos in a travelling wave, a simple way to learn timed motion. You need Arduino Uno R3, PCA9685 16-channel servo driver, SG90 Micro Servo × 8, 5 V 2 A USB adapter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drive many servos with one driver.

Parts list

How to build it

  1. Wire the driver on I2C
  2. Power the servos separately
  3. Move one servo
  4. Add a phase shift per servo
  5. Tune speed and range

Related projects

Common questions

What parts do I need for the eight-servo wave table?

Arduino Uno R3, PCA9685 16-channel servo driver, SG90 Micro Servo × 8, 5 V 2 A USB adapter and Breadboard 830 Tie Points.

How long does the eight-servo wave table take to build?

About 270 minutes for a intermediate maker.