Idea
In short
How do you build a candy colour sorter?
A servo gate directs coloured sweets into cups after a colour sensor identifies each one. You need Arduino Uno R3, TCS34725 colour sensor, SG90 Micro Servo × 2, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Classify colours with a sensor.
Parts list
- Development Boards
- Sensors
- Motors & ActuatorsSG90 Micro Servo × 2
- Prototyping
- Prototyping
How to build it
- Read RGB values
- Calibrate on known colours
- Classify with ranges
- Move the sorting gate
- Add a counter per colour
Common questions
What parts do I need for the candy colour sorter?
Arduino Uno R3, TCS34725 colour sensor, SG90 Micro Servo × 2, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the candy colour sorter take to build?
About 240 minutes for a intermediate maker.
