Idea
In short
How do you build a sixteen-servo test bench?
A servo driver board moves many servos from a single I2C connection so you can test a robot arm or hexapod leg. You need Arduino Nano, PCA9685 16-channel servo driver, SG90 Micro Servo × 4, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control many servos with two wires.
Parts list
- Development Boards
- Motor Drivers
- Motors & ActuatorsSG90 Micro Servo × 4
- Power
- Prototyping
How to build it
- Wire the driver and an external supply
- Set the PWM frequency
- Move one servo
- Move four together
- Store and replay a pose
Common questions
What parts do I need for the sixteen-servo test bench?
Arduino Nano, PCA9685 16-channel servo driver, SG90 Micro Servo × 4, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the sixteen-servo test bench take to build?
About 240 minutes for a intermediate maker.
