Idea
In short
How do you build a piano key tester with a 74HC165?
A parallel-in shift register reads 16 key switches with a handful of pins. You need Arduino Uno R3, 74HC165 parallel-in shift register × 2, Tactile push button 6 mm × 8, Resistor 10 kΩ × 8 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read many inputs with few pins.
Parts list
- Development Boards
- Integrated Circuits
- Switches
- PassivesResistor 10 kΩ × 8
- Prototyping
How to build it
- Wire the load and clock pins
- Read eight switches
- Chain a second register
- Print pressed keys
- Add a lit indicator for each
Common questions
What parts do I need for the piano key tester with a 74HC165?
Arduino Uno R3, 74HC165 parallel-in shift register × 2, Tactile push button 6 mm × 8, Resistor 10 kΩ × 8 and Breadboard 830 Tie Points.
How long does the piano key tester with a 74HC165 take to build?
About 180 minutes for a intermediate maker.
