Idea
In short
How do you build an eight switches on three pins?
A parallel-in shift register reads eight switches into a board with only three pins, and chains for more. You need Arduino Nano, 74HC165 parallel-in shift register, DIP switch 8-position, Resistor 10 kΩ × 8, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read many inputs with a shift register.
Parts list
- Development Boards
- Integrated Circuits
- Switches
- PassivesResistor 10 kΩ × 8
- Displays
- Prototyping
How to build it
- Wire the register and switches
- Load and clock the data
- Read eight bits
- Show them on the display
- Add a second register
Common questions
What parts do I need for the eight switches on three pins?
Arduino Nano, 74HC165 parallel-in shift register, DIP switch 8-position, Resistor 10 kΩ × 8, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the eight switches on three pins take to build?
About 240 minutes for a intermediate maker.
