Idea
In short
How do you build a pan-tilt cat toy with a light spot?
Two servos move an LED torch in random patterns for a pet, with a safe low-power white LED only. You need Arduino Uno R3, SG90 Micro Servo × 2, LED 5 mm white, Resistor 220 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make smooth random motion with two servos.
Parts list
- Development Boards
- Motors & ActuatorsSG90 Micro Servo × 2
- Optoelectronics
- Passives
- Prototyping
- Prototyping
How to build it
- Build a pan-tilt bracket
- Move to random points with easing
- Keep within safe angles
- Add a timer to stop after ten minutes
- Do not use a laser
Related projects
Common questions
What parts do I need for the pan-tilt cat toy with a light spot?
Arduino Uno R3, SG90 Micro Servo × 2, LED 5 mm white, Resistor 220 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the pan-tilt cat toy with a light spot take to build?
About 180 minutes for a intermediate maker.
