Idea
In short
How do you build a joystick pan-tilt mount?
A joystick steers two servos on a small bracket so a light or a phone can be aimed by hand. You need Arduino Uno R3, Joystick module (dual axis), SG90 Micro Servo × 2 and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 210 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Aim a mount with a joystick.
Parts list
- Development Boards
- Sensors
- Motors & ActuatorsSG90 Micro Servo × 2
- Prototyping
How to build it
- Wire the joystick
- Read both axes
- Map to angles
- Drive the two servos
- Add a centre dead zone
Related projects
Common questions
What parts do I need for the joystick pan-tilt mount?
Arduino Uno R3, Joystick module (dual axis), SG90 Micro Servo × 2 and Breadboard 830 Tie Points.
How long does the joystick pan-tilt mount take to build?
About 210 minutes for a beginner maker.
