Idea
In short
How do you build a four isolated 12 V inputs?
A four-channel optocoupler module lets a 3.3 or 5 V board read 12 V switches safely with a separate ground. You need Arduino Nano, Optocoupler isolation module (4-channel PC817), Tactile push button 6 mm × 4, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read 12 V signals safely.
Parts list
- Development Boards
- Interfaces
- Switches
- Power
- Prototyping
How to build it
- Read the module wiring
- Connect the 12 V side through a switch
- Read the board side
- Light a LED per input
- Check the two grounds stay apart
Common questions
What parts do I need for the four isolated 12 V inputs?
Arduino Nano, Optocoupler isolation module (4-channel PC817), Tactile push button 6 mm × 4, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
How long does the four isolated 12 V inputs take to build?
About 120 minutes for a beginner maker.
