Optocoupler isolation module (4-channel PC817)
Isolates signals between two circuits.
Function4-channel optocoupler
Supply voltageBoth sides
RatingLow speed only
Logic level3.3 to 24 V by resistor
InterfacesReviewedMPN PC817 4CHUsed in 2 projects
In short
What is the Optocoupler isolation module (4-channel PC817) and what is it used for?
Isolates signals between two circuits. Makers use it for isolating 12 to 24 V signals.
How it works
Each channel has an LED that shines on a phototransistor, passing the signal with no electrical connection.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | 4-channel optocoupler |
| Supply voltage | Both sides |
| Rating | Low speed only |
| Logic level | 3.3 to 24 V by resistor |
Pinout
IN1 to IN4Input side (through resistors)
V1 G1Input side supply
OUT1 to OUT4Open-collector outputs
V2 G2Output side supply
How to use it
Use to read 12 V or 24 V signals safely or to isolate grounds. It is slow (a few kHz), so it is not for fast signals.
Applications
Isolating 12 to 24 V signals
Builds that use it
Alternatives
- Optocoupler PC817Single IC
- Isolated DC-DC B0505SIsolated power
Common questions
What is the Optocoupler isolation module (4-channel PC817) used for?
In maker projects: isolating 12 to 24 V signals.
How does the Optocoupler isolation module (4-channel PC817) work?
Each channel has an LED that shines on a phototransistor, passing the signal with no electrical connection.
What voltage does the Optocoupler isolation module (4-channel PC817) need?
Both sides.
What can I use instead of the Optocoupler isolation module (4-channel PC817)?
Optocoupler PC817 and Isolated DC-DC B0505S.
